Green OMBT – General application guidelines
Product Usage Instructions
Product dosing instructions for cannabis clones, seedlings, vegetative stage and flower stage plants are provided in the Specific Applications Guidelines Section (below). However, Secoes recommends contacting us directly for guidance regarding product dosing, due to the variations associated with plant grow media, watering schedules, and indoor vs outdoor growing applications.
Green OMBT is a highly concentrated solution. Never apply undiluted concentrate to plants, or to transplanted clones and seedlings. Direct product usage is only recommended for initial clone/seedling preparations prior to transplanting.
Shake Green OMBT well prior to pouring. Measure carefully using a measuring cup with ounces and/or milliliter measurement gradients.
Store product in original container with cap tightly secured. Do not freeze. Do not store product in direct sunlight. Store in temperatures between 40-110 degrees F.
Guaranteed analysis Contains non-plant food ingredients. Not a plant food product. Ingredients: < 1% microorganisms (bacteria, archaea, fungi, algal protists), 99.9% water.
Material Compatibility
- Do not mix Green OMBT with fungicides.
- Perform jar test to ensure compatibility with different mixtures of chemicals, liquid fertilizers and herbicides.
Mixing Instructions
- Materials mixing instructions: Mix in the following order: water, fertilizers, chemicals, and Secoes Green OMBT.
Green OMBT – Specific application guidelines
CLONES/SEEDLINGS APPLICATION GUIDELINES
Green OMBT is formulated for use in all cannabis plant clone and seedling applications, including in direct watering, continuous feed, intermittent feed and for use in both soil and nonsoil/soilless (hydroponic) growth applications. Green OMBT can be applied in conjunction with other commercial seedling/clone start amendments and nutrients with a pH range of 5 to 9.
Dosing instructions for clones: Place Green OMBT product directly into a clean, open-top container, and dip clone stems into the undiluted product. If applying clone treatment gels or liquids, perform this step first and allow clone to dry prior to treating the clone in the undiluted Green OMBT product. Then dose Green OMBT product to clones as follows:
- Dosing Instructions for clones prior to transplant: Dose not less than 5 ml (1 teaspoon) or up to 30 ml (6 teaspoons) of Green OMBT product per gallon of water (or water/nutrient mixture of the grower’s choice). Apply dose directly to clone during each scheduled watering (prior to transplant).
- Dosing Instructions for clones transplanted into soil or soilless media: Transplant clone into the medium of choice (soil or soilless). Dose not less than 5 ml (1 teaspoon) or up to 30 ml (6 teaspoons) of Green OMBT product per gallon of water (or water/nutrient mixture of the grower’s choice). Apply initial dose directly to plant soil before scheduled watering. Dose product directly onto transplanted clone, into irrigation supply, or into irrigation/nutrient supply ensuring the transplanted clone receives Green OMBT product during each scheduled watering/irrigation application.
- Dosing Instructions for clones transplanted into hydroponic applications (void of any soil or soilless media): Dose not less than 5 ml (1 teaspoon) or up to 30 ml (6 teaspoons) of Green OMBT product per gallon of water (or water/nutrient mixture of the grower’s choice). Apply (by foliar misting or direct irrigation supply contact) to clone during each scheduled watering/irrigation or water/nutrient application.
Dosing instructions for seeds/seedlings: Place Green OMBT product directly into a clean, open-top container, and dip seeds into the undiluted product (during germination). Then remove seeds and proceed as usual. If germinating seeds on a paper or cloth media, saturate both the paper/cloth media and seeds with undiluted Green OMBT product. Then dose Green OMBT product to seeds/seedlings as follows:
- Dosing Instructions for seeds/seedlings prior to transplant: Dose not less than 5 ml (1 teaspoon) or up to 30 ml (6 teaspoons) of Green OMBT product per gallon of water (or water/nutrient mixture of the grower’s choice). Apply dose directly to seedling during each scheduled watering (prior to transplant).
- Dosing Instructions for seeds/seedlings transplanted into soil or soilless media: Transplant seed/seedling into the medium of choice (soil, soilless or a combination soil/soilless media product). Dose not less than 5 ml (1 teaspoon) or up to 30 ml (6 teaspoons) of Green OMBT product per gallon of water (or water/nutrient mixture of the grower’s choice). Apply initial dose directly to soil/soilless media before scheduled watering. Dose product directly onto planted seedling cube/pot, into irrigation supply, or into irrigation/nutrient supply ensuring the transplanted seedling receives Green OMBT product during each scheduled watering/irrigation application.
- Dosing Instructions for seeds/seedlings transplanted into hydroponic applications (void of any soil/soilless media): Dose not less than 5 ml (1 teaspoon) or up to 30 ml (6 teaspoons) of Green OMBT product per gallon of water (or water/nutrient mixture of the grower’s choice). Apply (by foliar misting or direct irrigation supply contact) to seedling during each scheduled watering/irrigation or water/nutrient application.
CANNABIS PLANTS – VEG STAGE APPLICATION GUIDELINES
Green OMBT can be applied in conjunction with other commercial soil or hydroponic nutrients with a pH range of 5 to 9.
Dosing instructions for soil applications:
Dose not less than 9 ml (or up to 12 ml) of Green OMBT product per gallon of water. Apply initial dose directly to plant soil before scheduled watering. Dose product during each scheduled irrigation (or combination irrigation/nutrient dosing) application.
Dosing Instructions for hydroponic soilless media applications: Dose not less than 10 ml (or up to 12 ml) of Green OMBT product per gallon of water. Dose product directly onto plant or into irrigation supply during each scheduled irrigation (or combination irrigation/nutrient dosing) application.
Dosing instructions for hydroponic applications (void of all soil & soilless media):
– Early Veg Stage WEEKS 1-2: Dose 5 ml (1 teaspoon) of Green OMBT product per gallon of water. Dose product directly onto plant or into irrigation supply during each scheduled irrigation (or combination irrigation/nutrient dosing) application.
– Veg Stage WEEKS 3 until Flower: Dose no less than 9 ml (or up to 12 ml) of Green OMBT product per gallon of water. Dose product directly onto plant or into irrigation supply during each scheduled irrigation (or combination irrigation/nutrient dosing) application.
This is a highly concentrated solution. Never apply undiluted concentrate. Shake well and measure carefully using a measuring cup with ounces and/or milliliter measurement gradients.
Store product in original container with cap tightly secured. Do not freeze. Do not store product in direct sunlight. Store in temperatures between 40-110 degrees F.
CANNABIS PLANTS – FLOWER STAGE APPLICATION GUIDELINES
Green OMBT is formulated for use in all cannabis plant crop applications, including in direct watering, continuous feed, intermittent feed and hydroponic foliar misting/watering and for use in both soil and soilless growth applications.
Green OMBT can be applied in conjunction with other commercial soil or hydroponic nutrients with a pH range of 5 to 9.
Dosing instructions for soil applications: Dose 12 ml (or up to 18 ml) of Green OMBT product per gallon of water. Apply initial dose directly to plant soil before scheduled watering. Dose product every other day during scheduled irrigation (or combination irrigation/nutrient dosing) application during Flower Stage until Flush. Discontinue product use during Flush week(s).
Dosing instructions for hydroponic soilless media applications: Dose 16 ml (or up to 18 ml) of Green OMBT product per gallon of water. Dose product directly onto plant or into irrigation supply during each scheduled irrigation (or combination irrigation/nutrient dosing) application during Flower stage until Flush. Discontinue product use during Flush week(s).
Dosing instructions for hydroponic applications (void of all soil & soilless media): Dose 5 ml (or up to 16 ml) of Green OMBT product per gallon of water. Dose product directly onto plant or into irrigation supply during each scheduled irrigation (or combination irrigation/nutrient dosing) application during Flower stage until Flush. Discontinue product use during Flush week(s).
This is a highly concentrated solution. Never apply undiluted concentrate. Shake well and measure carefully using a measuring cup with ounces and/or milliliter measurement gradients.
Store product in original container with cap tightly secured. Do not freeze. Do not store product in direct sunlight. Store in temperatures between 40-110 degrees F.
Composting application guidelines
Green OMBT is formulated for use in all composting applications, including in windrow pile, passive aeration, active aeration, and turning applications. Green OMBT can be applied in conjunction with other commercial soil nutrients with a pH range of 5 to 9. Mix in the following order: fertilizers, chemicals, water, and Secoes Green OMBT. Do not mix with fungicides.
Mixing instructions
For compost applications: Blend 1 gallon of Green OMBT product with a minimum of 10 gallons of water for every 21 cubic yards of compost.
This is a highly concentrated solution. Never apply undiluted concentrate. Shake well and measure carefully using a measuring cup with ounces and/or milliliter measurement gradients.
Store product in original container with cap tightly secured. Do not freeze. Do not store product in direct sunlight. Store in temperatures between 40-110 degrees F.